|
Identify the problem. |
Use RK PLASTERPLUG Drill Bit or a similar product the drill the hole to correct size. Choose the correct plug size. |
 For the best result, sand and clean the surroundings of the hole with RK PLASTERPLUG Sanding Sponge. |
|
Measure the depth of the hole and break the plug (with your hands) to the correct size. |
Apply RK PLASTERPLUG Fix to the plug. |
Press the plug slightly inside the surface. |
|
Spread the filler over the plug. |
Allow the filler to dry for 1-5 hours. |
Sand the surface for a smooth finish. |
|
Paint the wall with the color of your choice and you're done! |
